Structure size: (mm)
TYPE | NAME | PHOTO | SPECIFICATION | |||||||
RS-0332 | Plug | 63A 2P+E 220-250V IP67 |
||||||||
Reference dimensions | ||||||||||
a | b | c | d | e | f | g | h | h1 | h2 | i/φ |
112 | 250 | 37 | ||||||||
Notice: h1 is for plastic box h2 is for sheet metal box |
63A 2P+E 6h/380V-415V~
IP67 single phase industry plug for quickly install.
3 pin single phase moving plug for out door.
TYPE | NAME | PHOTO | SPECIFICATION | |||||||
RS-0332 | Plug | 63A 2P+E 220-250V IP67 |
||||||||
Reference dimensions | ||||||||||
a | b | c | d | e | f | g | h | h1 | h2 | i/φ |
112 | 250 | 37 | ||||||||
Notice: h1 is for plastic box h2 is for sheet metal box |
▲ Type: RS-0332(CEIRSIEC)
▲ Environmental information: RoHS
▲ Executive Standard of the Product: CE NO.LVD17-7034 GB/T11918
▲ Certificate: CE CQC
▲ In rated current: 63A
▲ The rated operational voltage: AC220-415V~
▲ Withstand voltage: AC2500V~
▲ Insulation voltage: 500V d.c 1min > 5M
▲ Instantaneous impulse current: 10KA
▲ IP degree of protection: IP67
▲ Mechanical Endurance: inserted in and pulled out 50000 cycles
▲ IK: IK07
▲ Salt tolerance: 48h unrusted
▲ Acid resistance: 48h noncorrosive
▲Contact: Contact are brass (RoHS)
▲Body
Material: Flame retardant nylon(PA) Glow-wire 650℃
Color: bule gray
Production process: injection molding
▲Contact Material for plastic parts
Material: Flame retardant nylon(PA) Glow-wire 850℃
Color: Black
Production process: injection molding
▲ Temperature: -25℃~70℃
▲ Humidity: 40℃, 93%
Produced according to national standards: GB/T11918.1-2014, GB/T11918.2-2014, IEC60309.
Single Phase three pins, In rated current: 63A
Ue rated operational voltage: AC200-250V~
Network frequency: 50-60Hz, Earth position: 6h
IP degree of protection: IP67
▲ Inner Box: 2pcs/box,
▲ Carton: 20pcs/carton
▲ RS-1332, RS-2332, RS-3332, RS-4332
▲ Follow the panel instructions L/+ , Grounding
▲ Connection: lift the socket cover and insert the plug (the gap between the plug and the socket is less than 0.3mm) so that the socket cover is clamped on the lug of the plug sheath.
▲ Exit: turn up the cover of the socket, pull out the plug horizontally with the socket, and check that the cover of the socket returns to its original position.