Structure size: (mm)
TYPE | NAME | PHOTO | SPECIFICATION | |||||||
RS-2252 | Connector | 32A 3P+E 380-415V IP67 |
||||||||
Reference dimensions | ||||||||||
a | b | c | d | e | f | g | h | h1 | h2 | i/φ |
195 | 99 | 22 | 103 | |||||||
Notice: h1 is for plastic box h2 is for sheet metal box |
32A 3P+N+E 6h/220-380V~/240-415V~
IP67 industry connector for quickly install.
5 pin coupler used for outdoor.
TYPE | NAME | PHOTO | SPECIFICATION | |||||||
RS-2252 | Connector | 32A 3P+E 380-415V IP67 |
||||||||
Reference dimensions | ||||||||||
a | b | c | d | e | f | g | h | h1 | h2 | i/φ |
195 | 99 | 22 | 103 | |||||||
Notice: h1 is for plastic box h2 is for sheet metal box |
▲ Type: RS-2252(CEIRSIEC)
▲ Environmental information: RoHS
▲ Executive Standard of the Product: CE NO.LVD17-7034 GB/T11918
▲ Certificate: CE CQC
▲ In rated current: 32A
▲ The rated operational voltage: AC220-380V~/240-415V~
▲ Withstand voltage: AC2500V~
▲ Insulation voltage: 500V d.c 1min > 5M
▲ Instantaneous impulse current: 10KA
▲ IP degree of protection: IP67
▲ Mechanical Endurance: inserted in and pulled out 50000 cycles
▲ IK: IK07
▲ Salt tolerance: 48h unrusted
▲ Acid resistance: 48h noncorrosive
▲Contact: Contact are brass (RoHS)
▲Body
Material: Flame retardant nylon(PA) Glow-wire 650℃
Color: red gray
Production process: injection molding
▲Contact Material for plastic parts
Material: Flame retardant nylon(PA) Glow-wire 850℃
Color: Black
Production process: injection molding
▲ Temperature: -25℃~70℃
▲ Humidity: 40℃, 93%
Produced according to national standards: GB/T11918.1-2014, GB/T11918.2-2014, IEC60309.
Single Phase three pins, In rated current: 32A
Ue rated operational voltage: AC220-380V~/240-415V~
Network frequency: 50-60Hz
Earth position: 6h
IP degree of protection: IP67
▲ Inner Box: 10pcs/box,
▲ Carton: 60pcs /carton
▲ RS-0252
▲ Follow the panel instructions L/+ , Grounding
▲ Connection: lift the socket cover and insert the plug (the gap between the plug and the socket is less than 0.3mm) so that the socket cover is clamped on the lug of the plug sheath.
▲ Exit: turn up the cover of the socket, pull out the plug horizontally with the socket, and check that the cover of the socket returns to its original position.